Installation of all aspects of high end cabinetry. Attention to detail and being able to work in a team environment is a must. For further details and to apply please contact Garrath on the above contact details.

ABOUT YOU
• You have a current driver's license and the capacity for regular travel. A proven history of experience with cabinet making trade is essential, ideally 5 years or more of industry experience and up to date Cert III level qualifications in cabinet making, joinery or furniture making. You are computer savvy with Microsoft Office and can complete administration and reporting requirements with minimal assistance. Previous experience in training or mentoring apprentices will be highly regarded. You are willing to obtain or already have a current Working With Children Check and Police Check.

YOUR NEW ROLE
• As the outgoing Workplace Trainer, you will keep your Trainees and Apprentices engaged in their learning while delivering professional training. You will provide feedback and contribute to the development and improvement of training with your team. The majority of your working week will be spent travelling out to sites to visit apprentices and clients as you establish ongoing and authentic relationships as their trusted advisor and furnishing industry expert across Sydney.

WHAT'S IN IT FOR YOU?
• This permanent position offers a generous salary with fully maintained company vehicle, laptop, Ipad and phone and credit card. You will have the freedom to schedule your own day and appointments. You will be paid to undergo training and become qualified in a Certificate IV in Training and assessment. You will also have excellent working conditions with a wonderful team of people and the ability to be a positive influence on the lives of those you are training. Best of all, this rewarding opportunity allows you to utilise your skills and experience to assist people entering into the trade as well as great career development opportunities.

CONTACT
• If this is the change you have been looking for, click the above link to forward an up-to-date CV or for more information you can contact Liz at Randstad on liz.sealey@randstad.com.au / 02 4032 7354 for a confidential discussion.

CN Fitouts currently have 2 positions available for qualified experienced cabinet makers, On site installer and factory based assembly and general factory duties. Applicants must be reliable and able to work as part of a team. Our work includes all types of custom made joinery ranging from domestic to commercial shop and office fit outs.

We are looking for an experienced qualified cabinet maker to join our factory based cabinet assembly department. Experience with kitchen manufacturing preferred but not essential.
The successful applicant will enjoy working in a team environment with the potential to expand their experience & knowledge.
We can offer a permanent full time position with good job security & the availability of overtime.
Salary will be negotiated according to your experience & knowledge.

Central Kitchens are looking for a qualified Cabinetmaker / Installer to join our team in a full time capacity.
(3rd / 4th year apprentice would also be considered)

If you meet the criteria and interested in this position please email stacey@centralkitchens.com.au.

Fulltime (38hr) Experianced Cabinetmaker required for a busy Kitchen/Joinery business located in Mittagong NSW. We would also consider 3rd/4th year apprentice to join our team

Assist customers with their new kitchen by explaining products, services and company history as well as helping with choices before appointing a kitchen design appointment.

Assist showroom Manager in all other showroom areas as required.

Bayldon Commercial Joinery is a small business working on a range of office and shop fit outs to domestic joinery. We require a qualified cabinet maker to do a range of tasks from running CNC router, edging, assembly to installing.

If you are interested in this position please contact Marian Sabol on the above contact details.

Specialist in kitchen & custom joinery looking for dedicated 1st, 2nd, 3rd or 4th year apprentice. Must show initiative & be reliable.

If you are interested in applying for the above position email resume to reception@attards.com.au or phone 02 9838 8608.

Experienced Cabinetmaker and Joinery installers required for mid to high end Architectural Joinery. You will be manufacturing and installing kitchens, wardrobes, laundries, and all types of custom joinery. Own tools and vehicle preferred, but can be negotiated for the right person.

Essential Criteria:

- Must have previous experience in a similar role.
- Must be confident on the tools, be able to read plans and drawings, and present well to customers
- Must have strong attention to detail
- If you would like to apply for this position or require further information, please contact Rod on the above contact details.

We are looking for enthusiastic team players able to hit the ground running in all three positions to produce high quality joinery for residential projects.
You will require good eye for detail, an excellent work ethic, pride in your work, good communication skills and initiative.

Cabinetmaker
• Able to read and follow workshop drawings.
• Installation experience advantageous.

Apprentice
• 1st year through to 4th year.
• School-based apprenticeships and adult apprentices will be considered.

CAD Operator
• Cabinetmaking experience
• Work directly with project managers and estimators.
• Training provided.

Remuneration will be relative to your experience and ability.

Immediate start for the right applicant/s.

If you feel that you are suited to any of the above positions please contact David on the number above

We specialise in Kitchens, Bathrooms, Laundries & fine joinery. Full project renovations.

Seeking labourers to assist with day to day work as required either onsite or occasionally at our boutique workshop.

- Must be motivated and reliable
- Own transport
- Own insurances
- Some heavy lifting may be required
- Knowledge of tools
- Good initiative
- Experience in similar or in the industry advantageous
- Willingness to work
- Follow company core values and principles
- Work safely
- We are looking for expressions of interest for casual contract work.

Please call to discuss further.

Seeking Experienced Installers/Joiners/Carpenters to install our custom made kitchens & cabinetry throughout the Sydney metro area.

As we pride ourselves in our outstanding quality & service and strong attention to detail the following is essential:

- Previous experience in similar role/ environment
- Knowledge in the latest kitchen fittings and trends (or ability to learn quickly)
- Good eye for attention to detail
- Pride in own workmanship
- Consider quality and service as a high priority
- Ability to read and follow workshop drawings
- Present & communicate well to customers
- Work safely
- Uphold the company core values and principles
- Own tools required
- Own transport required
- Must supply own insurances

Please contact us for further details

We are currently seeking an experienced Qualified Tradesperson.

Previous experience fabricating various Joinery items to include Banquette Seating, Waiters Stations, Table Frames & Tops
Our requirements involve someone to have the skills and confidence to fabricate items from start to finish - from workshop drawing stage through to installation on site
- We are looking for someone with strong communication skills, reliable and have a positive attitude
- Drivers Licence & White Card necessary
- Full-time, 38 hour week
- Close to Public Transport
- Immediate Start

If you meet the above criteria please submit your Resume to: elissa@contempofurniture.com.au

We are looking for a motivated person to join our team. All our work is residential and mostly at the northern beaches.

If you are interested in this position and would like to learn a whole lot of new skills, send your CV to info@huskandco.com.au

We are looking for a tradesperson for factory and installation work, mainly in the Blue Mountains.

On occasion there is overtime and some Saturday work. You will need to be motivated and can work unsupervised, you will need to have a driver's licence. Our work is mostly local to the Blue Mountains with some commercial work around Sydney.

About the business:
Woodstock Industries custom design, manufacture and install bespoke joinery for architecturally designed residential and business projects.

About the role:
Be part of a driven & passionate team with an organisation that has been established for well over 25 years!

An opportunity exists for a qualified and experienced Joiner on the Central Coast, NSW. The successful applicant must be highly motivated with the following skills & experience:

- Sound knowledge & experience with custom/ architectural joinery
- Ability to work to production priorities & timeframes
- Ability to read & interpret shop drawings and production paperwork
- Ability to produce joinery in accordance to the company's exceptional standards
- Self-starter, efficient & team player attitude is essential
- Valid drivers licence
- Forklift licence preferred but not essential

Option for immediate start, or January 2019 start.

For further details please contact Christine on the above contact details or click here for the link to apply.

Minimum 5 years cabinet maker experience required. Well respected and established high end Joinery Company has an excellent opening for a detailed and experienced cabinet maker. This is a Full Time position with a focus on high quality joinery.

Applicant must have the following attributes to be successful in the role:
(Please do not apply if you have no experience)

- You will need to be well presented, trustworthy, and punctual
- Drivers licence is essential
- Strong attention to detail and quality control
- Ability to work under pressure and meet deadlines

We are keen to hear what you may have to offer and flexible to see how you may fit in our team. Please dont hesitate to contact us and come in and meet the team and have a chat about our available role.

Please contact Robert.

2 Positions. A cabinet maker and Installer. If you can do both, that is an advantage. We are company situated in Hallam who specialise in all aspects of Cabinetry including Kitchens, Bathroom, Laundries, Built in wardrobes and much more. We’re looking for the right candidate who can deliver cabinets using the specs provided by our foreman.

Required:
- Ability to use power tools (drill, jigsaw, etc.) and hand tools.
- Required to have knowledge of cabinet installation with the ability to take accurate measurements
- Two or more years of cabinetmaking experience

Preferred:
- Experience with using a CNC machine would be an advantage
- Willing to work evenings, and Saturday’s when requested
- Periodic travel may be required

Qualified cabinet maker required for domestic and commercial installations. Family owned and operated business for over 40 years. Above award rates and housing option available.

JPC Kitchens is looking for an experienced full-time cabinet maker to be based in our factory in Alexandria to start on the 7th January 2019. We are a family run business located in Alexandria. We design, manufacture and install custom kitchens and joinery. JPC kitchens has been established for over 30 years.

Duties:
- Cutting on the CNC Router
- Assembling and building cabinetry
- Looking after stock and ordering stock when required
- Conducting site check measures when required
- Assisting in other areas when required e.g. site installations

Skills Required:
- Qualified Cabinet Maker
- Minimum 10 Years’ Experience in the industry
- Work unsupervised to complete all tasks on time
- Knowledge of all machinery such as Table Saws, Edge Bander, Drop Saws and Biesse CNC
- Presentable, well-mannered and works well in a team environment
- Holds a current Driver’s License
- Fork Lift Licence Desirable but not essential

Full Time Position

Woodstock Industries is an established architectural kitchen & joinery business based on the Central Coast NSW.

We are seeking an experienced joinery tradesperson (minimum of 5 yrs experience & drivers licence essential) to join our team.

The position is well suited to a reliable and enthusiastic candidate looking to be part of a strong business offering superior quality products and service.

If you believe you satisfy all of the above please email your resume to Christine at the contact details above or call on 02 4389 3118.

Specialist in kitchen & custom joinery looking for dedicated 1st, 2nd, 3rd or 4th year apprentice. Must show initiative & be reliable.

If you are interested in applying for the above position email resume to reception@attards.com.au or phone 02 9838 8608.

Kleverkamp bros is a small family business working on a range of high end to basic granny flats. We require a qualified cabinet maker to do a range of tasks from running CNC router to installing.

If you are interested in this position please email your expression of interest and resume to kleverkampbros@gmail.com

We operate a well-established and reputable family business. In recent years, we have experienced substantial growth and have evolved into new markets. Our business services customers from Brisbane to Melbourne and in between.

We require a talented Project Coordinator who has had previous experience in the construction industry; preferably in the installation of Wardrobes and Shower Screens. This is an office based job with periodic site visits.

Duties and Responsibilities:

- Liaise with our sales team to understand installation start times and completion deadlines
- Coordinate measuring of upcoming projects.
- Liaise with our purchasing & production teams ensuring products are being manufactured in time to meet project installation deadlines.
- Communication with production manager and coordination of delivery to project site
- Manage and supervise a small team of Installers.
- Management of the onsite installation process, including but not limited to:
1. Communication with installers, making sure we are installing products to strict deadline.
2. Oversight of installation rollout, monitoring current and potential problems.
- Communication with representatives of head contractors to ensure smooth and efficient rollout of projects.
- Confirming all important communications in writing, maintaining constant awareness of contract requirements.
- Systematically close out projects on completion, obtaining mutual agreement from head contractors that project has been completed in accordance with all aspects of the contract.

Skills & Experience:

- A methodical thinker who possesses excellent time management skills.
- Excellent attention to detail
- Ability to problem solve and think outside the box.
- Display leadership with a positive attitude with the ability to motivate staff.
- Ability to remain calm and friendly when under pressure.
- Manage client expectations with the goal of creating long term relationships.
- Trade background desirable, in order to advise and add valued input when necessary.
- Establish KPI's and to clearly communicate progress and results back to key stakeholder.

What's on Offer:

- A fast-paced challenging environment
- A clean, modern and positive work environment.
- An employer committed to investing in the latest systems and equipment.
- An attractive remuneration package with performance based bonuses tied to performance appraisals and KPI's.

Applicants will be required to address the criteria and provide evidence of experience, skills & attributes. If you would like to become part of our team please contact Sam on 02 6332 4200 or email on sam@distinctivewardrobes.com.

We operate a well-established and reputable family business. In recent years, we have experienced substantial growth and have evolved into new markets. Our business services customers from Brisbane to Melbourne and in between.

We require a talented and exceptional Joiner/Shopfitter/Carpenter/Cabinetmaker to act as 2IC to our Production Manager. You will assist the Product Manager with both factory and office tasks, manage production staff, maintain machinery and step into the role when and as required.

This is a hands on role both in production and office administration including preparation of cutting lists, etc.

The Role:
1. Factory production, leading staff on the factory floor
2. Office duties such as preparation of cutting lists
3. Site work installing and managing subcontract fitters

Essential Criteria:
- Joiner or Cabinet Maker with extensive experience. (5 yrs +)
- Experience with machinery such as beam saws, flat bed routers and edgebanders
- Experience with computers, in particular the microsoft office programs

Skills & Attributes:
- Positive and highly productive
- Team Worker
- Attention to detail and well organised
- Accountable to ensure all tasks are completed
- Go above and beyond when required
- Ability to receive and carry out instructions
- Ability to give clear and definite instructions
- Works well under pressure
- Efficiency mindset. Work to "lean" principles

Applicants will be required to address the essential criteria and provide evidence of skills & attributes. If you would like to become part of our team please contact Sam on 02 6332 4200 or email on sam@distinctivewardrobes.com.

We are looking for a Beamsaw Operator to work on Homag Beamsaws.

Role includes:
- Operate Beamsaw
- Liaise with Programmers to complete orders
- Quality control of orders being cut
- Program beams for on the ground changes and amendments
- Full Time work Monday - Friday
- Email your resume to hr@trademaster.com.au , we are looking to hire ASAP.
- Great salary and work conditions for the right candidate.

We are seeking motivated and enthusiastic candidates to join our team.

Duties and key responsibilities include:
- Handling enquiries and sales for benchtops and Flatpack kitchens
- Handling telephone, email and fax orders, making invoices on Quickbooks Software, taking payments
- Entering Benchtop Orders on Software Programs like Topaz
- Liasing with our Manufacturing department on Benchtop Orders
- Providing quotations to customers
- Overseeing all issues related to the Benchtops Department
- General administration including filing, data entry, correspondence

We are willing to offer extensive training. Role can suit ex-tradies looking to move onto office work. Long-term job for the right candidates.